|
| Spray System Parts |
|
|
Master Control Unit
Shoo-fly's Master Control Unit consists of all the components necessary to operate the insecticide system (as described below). The Master Unit is capable of protecting barns with up to 80 stalls. (Larger units are available).
The 24 hour mechanical timer can be set around the cloc...
|
|
|
Complete Nozzle
The Insecticide Nozzle consists of a male branch tee (used to splice into tubing), a standard adapter (used to adapt insecticide nozzle tip to male branch tee), and the insecticide nozzle tip.
|
|
|
Nylon Tubing
1/4" x 250' rolls - This tubing is made from nylon which gives it incredible strength. This tubing can withstand pressures of up to 1,000 pounds per square inch without rupturing.
|
|
|
Water Filter
The quality of service that you get from your automatic insect control system is directly related to the quality of the water that you put into the system. Shoo-fly's insecticides are designed to remain emulsified in pure, de-ionized water...
|
|
|
Nozzle Replacement Tip
The insecticide nozzle tips are manufactured from high quality brass (filter) and stainless steel. The nozzle tip has a built in check and filtering system...
|
|
|
Tri-Jet Portable Fogger
The Shoo-fly Tri-Jet portable Fogger is suitable for a wide range of uses for both indoor and outdoor applications. Food plants, hotels, barns, parks and hospitals are just a few examples of sites which depend on the Shoo-fly Tri-Jet Fogger for effective treatment.
|
|
|
Timer
This mechanical timer is very user friendly and can be set around the clock to meet your particular needs. The instructions are located inside the access door on the left hand side. Clock dial is color-coded for a.m. and p.m. and is very easily set by rotating counterclockwise until the time is...
|
|
|
Pressure Gauge
The Pressure Gauge has a 2 1/2 inch face with a dial indicator from 0 to 300 psi...
|
|
|
Motor
The 1/3 HP heavy duty motor operates at 1725 RPMs, 115 volts using 6 amps...
|
|
|
Union
The Union enables the connection of tubing...
|
|
|
Union Elbow
The Union Elbow is designed to make a 90º bend in the tubing...
|
|
|
Union Tee
The Union Tee is used when the routing of the tubing needs to continue in two directions...
|
|
|
Bleeder Valve
The Bleeder Valve is used to bleed excess air out of the tubing...
|
|
|
|